Fine Adjustment; Specifications - NEC NP03CM Installation And Adjustment Manual

Fine Adjustment

Loosen the same screws that were used in the distortion adjustment and
finely adjust the angle so that the projected image fits the screen, then tighten
all the screws (i.e., a total of 14 including the inclination axis screws).
After the adjustments, check that the parts are fixed securely.

Specifications

Product Name
Model
Adjustment angle
Dimensions
Weight
Supplied Items
Specifications and design are subject to change without notice.
: Projector Ceiling Mount Unit
: NP03CM
: Up-down angle +/-10˚
Left-right angle +/-10˚
Inclination angle +/-10˚
: 227 (W) x 263.8 (D) x 105.2 (H) mm
(when assembled, not including protruding parts)
: Approximately 2.0 kg
: Projector mounting screws(M4) ..................................3
Up-down angle adjustment screws (M5)......................4
Installation and adjustment manual .............................1
Adjustment of the Projection Angle
15