When Using The Pc Card Viewer Function - NEC MultiSync LT140 User Manual

When using the PC Card Viewer function

Problem
No picture
Part of a slide is not displayed
Contents of CompactFlash
Card are damaged
For more information contact your dealer.
Check These Items
• Is "PC Card Viewer" selected from the Source menu?
• Is the CompactFlash memory card seated in the PC CARD ACCESS slot completely?
• Are slide data stored in the CompactFlash memory card?
• Have the contents of the CompactFlash memory card been destroyed?
• While an image with over 1024 768 dots is projected, several lines of information will be lost. Use the
supplied software change the image to 1024 768 dots in size.
• Areas of slides exceeding 1024 768 (LT84: 800 600 dots) cannot be displayed. Use the PC Card
Viewer software, etc., to change the image size to 1024 768 dots (LT84: 800 600 dots).
In addition, the displayable image size differs according to the resolution of the projector. Use the PC Card
Viewer software, etc., to change the image size.
Note that on LT84 JPEG images exceeding 800 600 dots are scaled down to three-quarters of its original
size. Example: a JPEG image exceeding 1024 768 dots is displayed in 768 (=1024 3/4) 576 (=768 3/
4) dots.
• Use a computer, etc., to repair the data.
E–36