6> Select "Add Boot Devices" and press <Enter>.
7> A screen appears displaying the discovered targets. Then select the Boot device and press <Enter>.
If no Boot Device can be discovered from this product, confirm the WWPN which
you selected. Refer "Appendix B Confirm WWPN addresses after setup" to find this
product's WWPN. If you have selected the correct WWPN, confirm that the Fibre
Channel device is properly connected and its settings are all correct. Then, reboot
the computer and try these steps from the beginning.
8> A list of bootable LUNs is displayed. Then select "LUN:0000" and press <Enter>.