Table of Contents
Advertisement
If the above menu is not displayed and the window has gone to the next one, press
<Alt>, <Ctrl> and <Del> keys simultaneously to reboot the computer. Then, start
the steps from the beginning.
The message sample is just for your reference. Some of them may be different
depending on the computer or its configurations.
4> When the menu is displayed, select the port connected to the Fibre Channel device. Then, you see
the information window.
5> Select "Reset Adapter Defaults" to set this product's configuration to defaults. Then press <y> when
this message is displayed.
Reset Adapter Configuration to Defaults? (Y/N) :
Advertisement
Table of Contents
