Table of Contents
Advertisement
6> Select "Configure Boot Devices" to display the Boot device's settings window.
If no Boot device can be detected from this product you selected above, you will
see a message, "This Adapter is not ready, try again!" If you selected a wrong
number in the above step, press <Esc> key to return to the previous window and
select the correct one.
If you have selected the correct figure, confirm that the Fibre Channel device is
properly connected and its settings are all correct. Then, reboot the computer and
try these steps from the beginning.
7> Select an entry number to register the Boot device. Then, you see the window to select a device.
Advertisement
Table of Contents
