Advertisement
Available languages
Available languages
User Manual • Instrukcja Obsługi
5.2 Menu control
OK
12
1 ) Press "OK"
once "Main Menu" appears on the
2) Use the UP and DOWN keys to select the
menu to be used:
Setup (Setup Menu): To set the setting
options.
Option (Option Menu): To set the operating
options
Information (Information Menu): To read the
counters, software version and other
information.
Manual Control (Manual control Menu): To
trigger the test and manual control functions.
5.3 Voltage specification
Input Voltage
100~240V AC
5.4 Connecting power supply
The connection is performed using
power cable with PowerCon connector
( i n c l u d e d ) . T h e d e v i c e m u s t b e
Confirms the displayed value, or activates the displayed
OK
function, or enters the successive menu.
Decreases the value displayed (with auto-repetitions) or
passes to the next item in the menu.
DOWN
Increases the value displayed (with auto-repetitions) or
passes to the previous item in a menu.
UP
Return to the top level.
LEFT
Commute from units, tens, hundreds, in the „Address",
„Fixture ID" and „Calibration" menu.
RIGHT
OK
Reversal of the display. To activate this function, press UP and DOWN
keys simultaneously while the display is in the rest mode.This status will
be memorised and maintained even for the next time it will be switched
on. To return to t he initial state, repeat the operation all over again.
Total Power
400W
Test (Test Menu): To check the proper
functionning of effects
Advanced (Advanced Menu): Access to the
„Advanced menu"
is recommended for a
trained technical personnel.
„Advanced" password: 988
3) Press "OK" to display the first item in the
selected menu.
4) Use the UP and DOWN keys to select the
MENU items.
operated by qualified personnel.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not exceeded.
OK
Frequency
50/60Hz
Advertisement
