Flash 330 CMY User Manual page 3

3. PRODUCT INFORMATION
Light Source: 1 Standard LED (Single color)
Power consumption: 400W
Power supply voltage: 100-240V,
50/60Hz AC
PAN range: 540°
TILT range: 270°
Beam angle (min/max): 5°-40°
Color: 3 Color wheels - smooth CMY
mixing and 4 colors + white on each wheel
Zoom: Yes
Focus: Electronic
Fixed: 10 patterns + open;
Rotary: 5 patterns + open
Prism: 3-faced
Flash frequency min./max: 0-20Hz
4. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit's
5. CONNECTION
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3(5)-pin socket
2. Power (in/out): powerCON socket
5.1 Connecting DMX signal
The connection is performed using cable with
XLR-female -> XLR-Male plugs.
DMX
Controller
DMX 512
LED Moving Head 330 CMY • Art No F7100509
Features: Smooth color adjustment
with CMY filters. Iris effect.
Operating modes: DMX 512, RDM, Artnet
(Optional), Auto-running, Master/Salve,
Sound active, Built-in program
Frost filter: Yes
22/27/30 DMX channel mode.
IP Rating: IP20
Housing made: ABS
Cooling: Active
AC IN: powerCON
3-Pin XLR DMX Input/Output
Net Weight: 28kg
Dimensions: H(82)xW(59)xD(54) cm
weight. Also always use a safety cable
that can hold 12 times of the weight of
the unit when installing the fixture. The
equipment must be fixed by professionals.
And it must be fixed at a place where is
out of the touch of people and has no one
pass by or under it.
DMX 512 120Ω
GROUND
1
DMX +
3
DMX -
2
3-pin XLR
FEMALE
XLR
GROUND
DMX -
DMX +
2
1
3
5-pin XLR
5
4
FEMALE
XLR
CAUTION! At the last fixture, the
DMX signal has to be terminated with
a terminator. Solder a 120Ω resistor
between signal (-) and signal (+) into a
XLR plug and plug it in the DMX output of
the last fixture.
1
3
2
MALE
XLR
2
1
3
4 5
MALE
XLR