Changing A Supply Fuse - Honeywell FF-SB14 Series Installation And Maintenance Manual

Industrial safety light curtain for the protection of machine operators

Hide thumbs Also See for FF-SB14 Series:

Table of Contents

Fuse

Transformer

(1)

Fig 8-3-1

(1)

Relay

Fig 8-3-2

8.3

Changing a supply fuse

Necessary tools: 1 TORX T20 or ACX 20 screwdriver

Spare parts: see § 9-3

Unscrew the 4 screws of the cover plate that carries

the connector

Remove the cover plate and the electronic board that

is fixed to it by letting the card sliding out until the fuse

(1) is exposed (fig. 8-3-1 and 8-3-2)

Change the fuse (See chapter 9), replace the card

and screw the cover plate.

107026-11-EN FR26 ROW 302 Printed in France

Table of Contents

Ff-sb14e s2 series Ff-sb14r s2 series