12
GRASS CATCHER MOUNTING
7. Return the rod position from hole (B) to hole (A) and
put snap pin.
(1) Rod
(2) Snap pin
To avoid personal injury:
A Safety switch does not work correctly without
connecting the rod to plate switch.
BDismounting the container
1. Park the machine on a level, spacious ground and
apply the parking brake and remove the key.
2. To release oil pressure, move the control lever
between "Dump" position and "Close" position.
3. Pull and turn the L pin so that the spring pin can lock
on the cut-out. Do the same on the opposite side.
4. Take out the container.
(3) Hole (A)
(4) Hole (B)