Table of Contents
Advertisement
Maintenance
To perform maintenance on this product the following tools listed below are needed.
4mm hex tool
5mm hex tool
No. 2 Posi Screwdriver
Replacing the LF Driver -
Remove the countersunk hex fasteners from the grille. (4mm hex tool)
Remove the No. 8 Flange head screws
TORUS 8 Rigging Manual
Copyright © 2023 Martin Audio Ltd.
Lift the horn assembly out of the enclosure and
disconnect the terminal spades on the LF and HF
drivers
35
TORUS 8 Rigging Manual
Advertisement
Table of Contents
