Martin Audio TORUS 8 Rigging Manual page 26

Rotate the base of the POLERIG20 and
replace the safety pin, making sure it engages
with the slot.
Before placing the cabinet onto a speaker
stand or distance pole, undo the thumb wheel.
The angle can be changed by removing the rigging and selecting one of the 5 holes available
TORUS 8 Rigging Manual
Copyright © 2023 Martin Audio Ltd.
Replace the R-Clip and select the desired
angle
Place the cabinet on the and secure by
tightening the thumb wheel
26
TORUS 8 Rigging Manual