User Controls - NEC MultiSync MD21GS-2MP Installation And Maintenance Manual

User Controls

The On-Screen Manager (OSM) control buttons are located on the back of the display. To access the OSM menu, press
any of the user control buttons ( < , >, –, +).
1. LED Indicates power on and signal condition. The LED can be turned on, off, or dimmed. Please
refer to the Advanced OSM section/LED Brightness for further information.
Green – signal is present and power is on
Orange – no signal
2. RESET Resets the highlighted control menu to the factory setting.
3. SELECT Enters the OSM controls and OSM sub menu.
Changes signal input.
4/5. ADJUST -/+ Moves the bar left/right to increase or decrease the adjustment.
6/7. CONTROL </> Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
Exits the OSM Controls and OSM Main Menu.
8. EXIT
For optional external sensor used for self calibration and copy calibration.
9. Sensor Port
The key guide will automatically appear on the screen when any control button on the
10. On-Screen
back is pressed. The key guide will change orientation along with the OSM.
Key Guide
When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the
NOTE:
RESET function by pressing the EXIT button.
Portrait Mode
5
Landscape Mode