User Controls; Front Panel Controls; Standard Osd Operation - NEC MultiSync LCD1700V User Manual

User Controls

Front Panel Controls

1. Power Switch To turn ON or OFF the power.
2. Power LED Lights up to indicate the power is turned ON.
3. + To increase the value of the parameter in the OSD, which been
selected for adjustment.
4. - To decrease the value of the parameter in the OSD, which been
selected for adjustment.
AUTO AUTO adjustment hot key without OSD display.
5. Select To move downward in the OSD menu.
6. Select MENU To exit and enter OSD menu.

Standard OSD Operation

1. Press any front panel key to activate the OSD menu.
2. Use Select Down key to move down through the menu. The parameter will be highlighted when selected.
3. Then use "+" or "-" to increase or decrease the value of the parameter, or make selection between different
options.
4. To quit the OSD screen at any time during the operation, press MENU key. If no keys are pressed for a
time period, the OSD automatically disappears.
AUTO
MENU
6 5 4
MultiSync LCD1700V english – 5
3 2 1