NEC MultiSync LCD1980FXi User Manual page 9

H. SIZE (OSM ROTATION: Landscape) or
V. SIZE (OSM ROTATION: Portrait) (Analog input only)
This setting increases or decreases the horizontal (or vertical) size.
If the "Auto Adjust function" does not give you a satisfactory picture setting, a further adjustments to tuning can be
performed manually using the "H. Size (or V. Size)" function (dot clock). For this, a Moiré test pattern should be used.
This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen.
If the H. Size (or V. Size) is wrongly calibrated, the result would look like on the left drawing. The image should be
homogeneous.
When H. SIZE value is
wrong.
FINE (Analog input only)
If the "Auto Adjust function" and the "H.Size" function do not give you a satisfactory picture setting, a fine tuning
adjustment can be performed using the "Fine" function.
Increasing or decreasing this setting improves focus, clarity and image stability.
For this, a Moiré test pattern should be used. If the Fine value is wrongly calibrated, the result would look like the
drawing on the left. The image should be homogeneous.
AccuColor Control Systems
®
Color Control Systems: Seven color presets select the desired color setting (sRGB, NATIVE and
PROGRAMMABLE color presets are standard and cannot be changed). Color temperature increases or decreases,
in each preset.
R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending
upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be
shown by the color bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
PROGRAMMABLE: The color tone that was set up with the downloaded application software is reflected.
NOTE: To reset a poor image setting, turn on the monitor by using front power button while holding the "EXIT"
and "SELECT" buttons simultaneously.
Tools 1
SHARPNESS: This function is digitally capable of keeping an image crisp at any resolution. It is continuously
EXPANSION MODE: Sets the zoom method.
FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.00 to 3.00 times individually
for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.
CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.00 to 3.00 times
individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.
VIDEO DETECT: Selects the method of video detection when more than one computer is connected.
FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode. When current video input
signal is not present, then the monitor searches for a video signal from the other video input port. If the video
signal is present in the other port, then the monitor switches the video source input port to the new found video
source automatically. The monitor will not look for other video signals while the current video source is present.
When H. SIZE value is
improved.
When FINE value is
wrong.
adjustable to get as distinct an image or as soft an image as you prefer, and set independently
within different timings.
When H. SIZE value is
When FINE value is
correct.
7
correct.