NEC MultiSync LCD1980FXi User Manual page 11

FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,
CONTRAST, BLACK LEVEL, AUTO BRIGHTNESS, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS,
EXPANSION MODE, OFF TIMER, OSM POSITION, OSM TURN OFF, DISPLAY MODE) back to the factory
settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.
Information
DISPLAY MODE: Provides information about the current resolution display and technical data including the
preset timing being used and the horizontal and vertical frequencies. Increases or decreases the current resolution.
MONITOR INFO.: Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned
on or when there is a change of input signal, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warns if the display is used with a reslolution other than the
optimized resolution. After power is turned on or when there is a change of input signal or the video signal doesn't
have the proper resolution, the Resolution Notifier window will open. This function can be disabled in the
TOOL menu.
OUT OF RANGE: When the input signal is non-supported timing or resolution, or the video signal doesn't have
proper timing or reslolution, then the Out of Range menu will appear.
NOTE: If "
For advanced user menu functions see the "Appendix".
CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION.
9