Advertisement
DXN with Nuclear GO Switches
Installation on Actuator
Orientations, Normal and Reverse Acting
Normal acting is full CW when the process valve is closed and CCW when the process valve is open. Reverse acting
is full CW when the process valve is open and CCW when the process valve is closed.
Illustration #2
The image to the right shows a Valvetop mounted
perpendicular to the process valve in the closed
position. The green arrow at the top shows the
"normal acting" direction of travel to open the valve.
Notice that the indicator dome has been rotated 90°
compared to the unit above.
Installation, Operation & Maintenance
Illustration #1
The image to the left shows a Valvetop unit mounted
parallel to the process valve in the closed position.
The green arrow at the top shows the "normal acting"
direction of travel to open the valve. This is the standard
orientation and your unit unless otherwise specified will
be factory set to operate in this fashion.
502.969.8000
Advertisement
