Disposal; Rectification Of Faults - Conrad Electronic ViewCam VC-1026B Operating Instructions Manual

Before cleaning or servicing the camera or connected in-plug
power supply, observe without fail the following safety infor-
mation:
When opening covers or removing components, live
parts may be exposed.
Before maintenance, repair or replacing compo-
nents or assemblies, the product must be dis-
connected from the supply voltage!
Capacitors in the unit may remain charged even
when the unit has been isolated from all voltage
sources.
Never replace damaged power supply connecting
cables personally. In such cases, remove the unit
from the power and take it to a specialist workshop.
Maintenance or repair must only be performed by a
specialist familiar with the associated dangers and
relevant regulations!

Disposal

Dispose of unusable equipment in accordance with applicable sta-
tutory regulations.
14

Rectification of faults

The ViewCam Camera VC-1026B is a product built to the latest
technological standards and is safe in operation.
However, problems or faults can arise.
For this reason, how faults can be rectified is described below:
Observe the safety information without fail!
Problem Solution
No picture Is the in-plug power supply correctly inserted?
Is the TV receiver switched on and ready to operate?
Is the correct programme number selected on the TV
receiver?
Is the camera correctly connected?
Other repairs than described above are to be car-
ried out exclusively by an authorised specialist.
15