Rmc Command-Line Interface - Compaq AlphaServer ES45 Service Manual

Hide thumbs Also See for AlphaServer ES45:

Table of Contents

RMC Command-Line Interface

The remote management console supports setup commands and

commands for managing the system.

The RMC commands are listed below.

clear {alert, port}

disable {alert, remote}

enable {alert, remote}

halt {in, out}

power {on, off}

set {alert, com1_mode, dial, escape, init, logout, password, user}

The commands for setting up and using the RMC are described in the following

sections. The dep command is reserved. For an RMC commands reference, see

the Owner's Guide.

Using the Remote Management Console

Do you have a question about the AlphaServer ES45 and is the answer not in the manual?