Handling Measuring Results - Seca 676 Manual

Handling measuring
results
WARNING!
Patient hazard
This device is no diagnostic device. It simply
assists the treating physician in establishing a
diagnosis.
– In order to make a precise diagnosis and
initiate therapeutic measures, besides
determination of the weight, further targeted
examinations must be set up by the
physician, and their results must be
considered.
– The responsibility for diagnosis and treatment
lies with the treating physician.
CAUTION!
Patient hazard
In order to avoid misinterpretations, test results
for medical use must be displayed and used in
SI units only. Some devices offer the ability to
display test results in other units. This is only an
additional function.
– Use the results exclusively in SI units.
– The use of measurement results in non-SI
units is the sole responsibility of the user.
ATTENTION!
Loss of data
• Before you save measurements aquired with
this device and process them for further use
(e.g. in the PC software
hospital information system), make sure the
measurement values are plausible.
• If measurement values are transmitted to the
PC software or a hospital
seca analytics
information system, make sure prior to further
use that the measurement values are plausi-
ble and are assigned to the correct patient.
English
or in a
seca analytics
Safety information • 59