Specifications - NEC MultiSync FE772M User Manual

Specifications

Picture Tube
Sync Input
Video Input
Plug & Play
Power
Consumption
Resolutions
Dimensions
&Weight
(with tilt/swivel
stand)
Power Input
Current Rating
Environmental
Conditions
Tilt/Swivel Stand
Signal cable
Power cord
Audio
NOTE: Information in this document is subject to change without notice.
*68K/85Hz, Cross Hatch, normal size.

17 inches (16.0 inches viewable)
90 degree deflection
0.25mm dot pitch
AGARAS (Anti-Glare Anti-Reflective Anti-Static) coating
Horizontal Freq.
Vertical Freq.
Input Form
Signal Input
Input Form
DDC 2B
Normal*
Stand-by/Suspend ≤ 15W
DPM Off
640 x 480 @ 60Hz to 120Hz
800 x 600 @ 55Hz to 110Hz
832 x 624 @ 55Hz to 106Hz
1024 x 768 @ 55Hz to 87Hz
1152 x 864 @ 55Hz to 77Hz
1280 x 1024 @ 55Hz to 66Hz
Max
Recommend
Width
Height
Depth
Net
AC 100-240V~ 50/60Hz
2.0A @ 100-240V
Operating Conditions
Temperature
Humidity
Storage Conditions
Temperature
Humidity
Detached
Attached
Detached
RMS Audio Output
Input Sensitivity
Speaker Impedance
30 - 71kHz (Automatic)
50 - 160Hz (Automatic)
Separate TTL, Positive/Negative
15 pin D-Sub Connector
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive
≤ 68W
≤ 5W
VESA 1280 x 1024 @ 66Hz
VESA 1024 x 768 @ 85Hz
400 mm / 15.8 inches
401mm / 15.8 inches
411 mm / 16.2inches
15.0 kg / 33.0 lbs
0˚C to 40 ˚C
10 % to 90 % non-Condensing
-20˚C to 60 ˚C
10 % to 90 % non-Condensing
1W + 1W (Right + Left)
0.7 Vrms
8Ω