Hints And Tips - GASLAND chef IH12BF Instructions For Installation And Use Manual

Hints And Tips

Problem
The induction
cooktop cannot
be turned on.
The touch controls
are unresponsive.
The touch controls
are difficult to
operate.
The glass is being
scratched.
Some pans make
crackling or clicking
noises.
The induction
cooktop makes a
low humming
noise when used
on a high heat
setting.
Fan noise coming
from the induction
cooktop.
8350 Patriot Blvd STE B, N. Charleston, SC 29418
www.gaslandchef.com
www.gaslandchef.com
Possible causes
No power.
The controls are locked.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is caused by the technology
of induction cooking.
A cooling fan built into your
induction cooktop has come on
to prevent the electronics from
overheating. It may continue to
run even after you've turned the
induction cooktop off.
What to do
Make sure the induction cooktop is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you've checked everything and the
problem persists, call a qualified
technician.
Unlock the controls. See section
'Using your induction cooktop' for
instructions
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
Use cookware with flat and smooth
bases. See 'Choosing the right
cookware'.
See 'Care and cleaning'.
This is normal for cookware and
does not indicate a fault.
This is normal, but the noise should
quieten down or disappear
completely when you decrease the
heat setting
This is normal and needs no action.
Do not switch the power to the
induction cooktop off at the wall
while the fan is running.
(844) 538-7890 support@gaslandchef.com
26