Before Locating The Fixing Brackets; Adjusting The Bracket Position - GASLAND chef IH12BF Instructions For Installation And Use Manual

Electric induction cooktop

Hide thumbs

Table Of Contents

Table of Contents

Before You Install The Cooktop, Make Sure That

• The work surface is square and level, and no structural members interfere with

space requirements.

• The work surface is made of a heat-resistant material.

• If the cooktop is installed above an oven, the oven has a built-in cooling fan

• The installation will comply with all clearance requirements and applicable

standards and regulations.

• A suitable isolating switch providing full disconnection from the mains power

supply is incorporated in the permanent wiring, mounted and positioned to

comply with the local wiring rules and regulations.

The isolating switch must be of an approved type and provide a 3 mm air gap

contact separation in all poles(or in all active phase conductors if the local

wiring rules allow for this variation of the requirements).

• The isolating switch will be easily accessible to the customer with the cooktop

installed.

• You consult local building authorities and by-laws if in doubt regarding installation.

• You use heat-resistant and easy-to-clean finishes(such as ceramic tiles) for the

wall surfaces surrounding the cooktop.

When You Have Installed The Cooktop, Make Sure

That

• The power supply cable is not accessible through cupboard doors or drawers.

• There is adequate flow of fresh air from outside the cabinetry to the base of the

cooktop.

• If the cooktop is installed above a drawer or cupboard space, a thermal protection

barrier is installed below the base of the cooktop.

• The isolating switch is easily accessible by the customer