Table of Contents
Advertisement
Tire
Check the tire pressure regularly and adjust.
•
Check when the tire cooled
•
Check if there any metal trash or gravel in the groove of tires, especially，should maintenance when the
tire lack.
•
Inspect whether there is nick, embed nail or other tartness object on the tread or not. Inspect whether
there is impress, dent or distortion for rim or not. If find any damaged, should invite service department to
inspect for you.
•
When the tire pattern wear and tear to the wear sign, must change the new tire.
WARNING:
•
If the tire pressure dose not accord with the standard, it will properly cause the traffic accident. If the
tire pressure is too low, the tire will fetch away or take of rim.
Ÿ
It is dangerous that use the worn tire; it will have effect to friction between tire and rode. Maybe
difficult to drive or accident.
Engine starting (Fig 23)
• Preparative before starting： Set up the main stand， put the key into
ignition switch and turn to " ON "，flameout Switch to" ON ".
•
Electric starter：Press start button (1) to start engine.
use the starter more than 5 seconds each time.
DO not
NOTICE ：
•
Electric starting is only in the condition of grasping the brake
handle.
Electric starting not succeed, if starting again with it, we must stop for 30 seconds, If still can't start, Please
use kick-start.
Engine kick-start: open ignition switch and add gasoline slowly, step kick-starter pedal down quickly with
strength to start engine.
Notice: After using kick-starter pedal, pull it back to original position. Otherwise have effect to
safety ride, and bad to engine.
Had better not open ignition switch when scooter has not use for a long time, and first step kick starter
for some times. Make flue into carburetor and then into cylinder, and open ignition switch, Start engine, it
is easy to start engine like this.
• If cold start warm up engine for 3 minutes.
13
14
Fig 23
Advertisement
Table of Contents
