Main Beam Switch; Turning Signal Light Switch; Horn Switch; Seat Lock - WangYe WY250T-19 Manual

Main beam switch （1） （Fig 7）
Press" "button，is main beam；Press"
Turning signal light switch （2） （Fig 7）
When the switches on ( ) ,the left turning signal light turn on. When the
switch on ( ), the right turning signal light turn on, Press it down the light
turn off.
Horn Switch ( 3)（Fig 7）
Press the horn makes sound.
Steering handle lock （Fig 8, Fig 9）
Turn handle left to end, presses down ignition key1 to（LOCK） ，the steering device are locked. Do the above
opposite it opened.

Seat Lock

Insert the key to seat lock hole under seat, then turn clockwise
direction and pull the pole according to the arrow direction,
may open the seat. (Fig 10, Fig 11)
Insert the key to left side hole of the seat, turn clockwise
direction, then rotate the handle according to the arrow direction,
may adjust the height of seat. (Fig 12, Fig 13)。
Rotate the handle according to the arrow direction,
may move the seat position. (Fig 14, Fig 15)
Front Luggage Case(Fig16)
Use Key turn clockwise 90°for opening

front luggage case 1.

Insert Key and turn clockwise 90°,push the
front Luggage case closely,
counterclockwise 90°for closing front luggage case.
"button is dipped beam.
7
Fig8
then turn
8
Fig9
Fig10
图 10
2
Fig1
Fig16
fig14
Fig7
Fig11
Fig13
Fig15