Table of Contents
Advertisement
Driving motor:
WARNING:
Wear the trousers to avoid touching with exhaust pipe and was burnt.
The entire device must be installed according to requirement of the traffic rule.
• Take the license to riding.
NOTICE:
Control the speed and load during 1000km of running in period. Load should be within 150kg (including
driver) If take more weight and speed will reduce life of engine.
Speed as per Chart 2：
Leg（km）
Speed (km/h)
Driving operation
• Take back Main stand and Sit on the seat, Left foot step on the ground make the vehicle and Ground upright.
• Release rear brake level, accelerate slowly with throttle grip, then motorcycle will move forward smoothly.
Decelerate gradually when you stop.
WARNING
• Don't operate the throttle ON-OFF suddenly, Otherwise, the motorcycle will run out, Maybe lose control.
• Before drive, must take the stand .
Braking operation:
1. Control throttle grip
If want to reduce speed, Must control the throttle grip, at that time use the two-brake system, this point is very
important.
Notice: if the drive will be done in this situation, for example: damp or loosely roads, raining .no matter
brake, accelerate or turn must take care.
2. Operate front and rear brake
Notice: Must totally close the flue when drive in a descent, and use two-brake system for reduce
speed. Don't uses brake continuously, other wise it will reduce the effect of brake because of too
hot.
Warning: Don't use single brake when drive with high speed, special crooked and slippery road. Must
use dual-brake system for avoiding accident.
0～200
200～500
≤30
15
16
500～1000
≤45
Chart 2
≤55
Advertisement
Table of Contents
