Table of Contents
Advertisement
Storage
For store up the motorcycle for a long period of time, for example, in wintertime, some steps should be taken to
prevent malfunction of and damage to its components, which might be caused by long storage. Besides, before the
long storage, proper maintenance has to be carried out for fear that it might be forgotten when vehicle is put back into
use after storage.
1.
Change engine oil.
2.
Drain off fuel from the fuel tank and carburetor.
Warning: Gasoline is inflammable and may cause fire and even explosion under certain conditions. Therefore,
do not smoke, make fire or have any fire left behind on draining off fuel.
•
Take out the spark plug, pour about 15~20ml clean engine oil into the cylinder, step down the kick lever
repetitively for several times so as to have machine oil distributed all over the engine and finally fit the
spark back on.
•
Remove battery，batter can't be kept on icing and direct sunshine location，charge every month.
•
Wash the motor, wipe it dry and apply an even coat of wax to the painted surface. Antirust can
prevent the surfaces from rusting.
•
Put the vehicle in a shady and cool place far from humidity and direct sunshine and cover it
properly (but not with plastic or other painted materials) 。
Reuse motorcycle.
Take down the motorcycle cover and clean the motorcycle, if the storage time exceeds 4 months, Must change
engine oil.
Must charging if need, and then install battery.
Must check all of terms before drive (Page9) for the safety must try the motorcycle with lower speed for some
time in a not busy rode.
Position of the vehicle type, VIN and engine number.
Provide the above frame and engine Number when register, get the license, yearly
inspection, and also enjoy the after-service clause.
The nameplate is riveted on the fixing board of the right part of main stand(See
page 3)
Tool bag(Fig 34)in the boot of seat, Using for the urgent accident when driving, it including the something of the
following：
8×10mm spanner 12×14mm spanner Screw drive
Hexagon spanner
Wrench bar
.Vehicle storage
Ⅴ
29
Ⅵ、Vehicle Identification
Ⅶ
.Tool set
18.5×17mm wrench spanner
30
（FIG 36）
Fig36
FIG37
Advertisement
Table of Contents
