Maintenance; Daily Maintenance; Monthly Maintenance; Cleaning Air Filter - Cornelius VIPER Operator's Manual

Hide thumbs Also See for VIPER:
Table of Contents

Advertisement

MAINTENANCE

D
M
AILY
AINTENANCE
M
M
ONTHLY
AINTENANCE

Cleaning Air Filter

© 2008, IMI Cornelius Inc.
(PRELIMINARY)
Maintenance is important to the quality of the product being served. The
following sections outline the minimum requirements for periodic maintenance of
the unit and the surrounding service area.
NOTE: Do not use abrasive cleaners on the unit.
NOTE: IMPORTANT! Only trained and qualified persons should
perform these cleaning procedures.
On a daily basis, clean all external surfaces with a mild soap solution and rinse
with clean water. Dry all external surfaces with a clean soft cloth. Remove the
drip tray (if applicable) and wash with a mild soap solution. Dry the tray
thoroughly and replace it.
CAUTION: Do not use chlorine based solutions on stainless steel
surfaces.
The air filter should be cleaned at least once a month (more often in harsh
environments). Perform the procedure in Table 7 to clean the air cleaner.
Step
1.
Open the merchandiser
2.
Remove the filter by grasping the two tabs (Figure 9) and sliding it straight
out the front of the unit.
3.
Carefully wash the filter with clean water. Shake out the excess water.
4.
Reinstall the air filter, mesh side down.
5.
Close the merchandiser.
- 11 -
Table 7
Action
Publication Number: 621260373OPR
Operator's Manual

Advertisement

Table of Contents
loading

Table of Contents