Terminal Panel - NEC AccuSync LCD3000 User Manual

8
AUDIO VIDEO
VIDEO IN OUT IN 3 IN 2
OUT
L
R
S-VIDEO IN IN
7
6
AC IN connector
1
Connects with the supplied power cord.
RGB 1 IN (DVI-D)
2
To input digital RGB signals from a computer having a digital RGB
output.
* This connector does not support analog input.
RGB 2 IN (mini D-Sub 15 pin)
3
To input a analog RGB signals from a personal computer or other
RGB equipment.
RGB 3 DVD/HD
4 [R/Cr/Pr, G/Y, B/Cb/Pb, H, V] (BNC)
IN connector: To input the analog RGB signals or signals from
other RGB equipment. Also for connecting equipment such as a
DVD player or HDTV laser disc player. A Sync-on-Green signal
can be connected to the G/Y connector.
RGB OUT connector (BNC)
5
To output the signal from the RGB 2 or RGB 3 DVD/HD IN
connector.

Terminal Panel

10
9
5
RGB OUT
R G B H V
R/Cr/Pr G/Y B/Cb/Pb H V
RGB 2 (D-SUB)
RGB3 DVD/HD IN
4 3
–continued
RGB 1 (DVI-D) AUDIO 1
PC IN
2
AUDIO IN 1,2,3
6
To input audio signal from external equipment such as a computer,
VCR or DVD player.
AUDIO OUT
7
To output the audio signal from the AUDIO IN 3 jack.
VIDEO
8
VIDEO IN connector (BNC and RCA): To input a composite video
signal. BNC and RCA are not available at the same time.
(Use only one input).
VIDEO OUT connector (BNC): To output the composite video
signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video (Y/C
separate signal).
EXTERNAL CONTROL (mini D-Sub 9 pin) RS232
9
IN connector: Use when operating the LCD monitor from the RGB
equipment like a computer.
EXTERNAL SPEAKER TERMINAL
10
To output the audio signal from AUDIO 1, 2 or 3 jack.
1