Safety; Dual Bio Amp; Input - ADInstruments Bio Amp Owner's Manual

Appendix C Specifications
Weight:
Power requirements:
Operating conditions:

Safety

Safety:
EMC:
Other approvals:
Equipment:
Operation:
Unsuitable uses:
Method of disposal:

Dual Bio Amp

Input

Connection type:
Input configuration:
Input impedance:
Isolation:
Amplification ranges:
770 g (1 lb 11 oz)
~2 W
5–35 °C, 0–90% humidity (non-condensing)
Approved to IEC601-1:1988 including A1 &
A2; BF rated (body protection)
Approved to EN60601-1-2:1993
CSA/US
Class I
Continuous
Do not use in the presence of flammable
anaesthetic - air mixtures. Avoid operating
near high voltage, RF or strong magnetic
fields that may cause interference.
Forward to recycling centre or return to
manufacturer.
Six-pin DIN/MS socket to fit 5-lead Bio Amp
cable (Tronomed D-1540)
2 isolated differential channels with common
isolated ground reference
Ω
200 M differential, 30 pF (no cable) or
500 pF (supplied Bio Amp cable and leads) to
isolated ground
4000 V (50 Hz for 1 minute)
rms
± 5 μV to ±100 mV full scale in 14 steps
(combined PowerLab and Bio Amp)
± 100 mV
± 50 mV
± 20 mV
± 10 mV
41