Toyota 1KZ-TE Repair Manual page 239

BACK TO CHAPTER INDEX
w/o Intercooler
w/o Intercooler
(g)
1KZ- -TE ENGINE SUP (RM790E)
ELECTRONIC CONTROL DIESEL
(b)
(c)
(d)
A11215
(e)
(e)
(f)
(g)
(h)
(i)
(d)
B12971
Page 7 of 7
- - THROTTLE BODY
Connect the air hose to the turbocharger, and place the
clamp lock together with the pliers and press down the tip
of the lock plate. Carefully let the lock spread apart. Take
care not to let the pliers slip.
Hilux:
Connect the 2 PCV hoses.
4runner, Land Cruiser/Land Cruiser Prado:
Connect the PCV hose to the clamp.
Install the intake pipe to the throttle body with the 4 seal
washers and 4 nuts.
Torque: 12 N∙m (120 kgf∙cm, 8 ft∙lbf)
Connect the vacuum hose to the throttle body.
Install the wire with the bolt.
Install the 2 wire clamps.
Connect the turbo pressure sensor connector.
1KZ-TE PAGES FROM SUPPLEMENT
BACK TO MODEL INDEX
ED- -7