Toyota 1KZ-TE Repair Manual page 188

BACK TO CHAPTER INDEX
DI- -124
2 Check voltage between terminal FSW of engine ECU connector and body
ground.
ON
FSW
(+)
NG
Check for open and short in harness and
connector between shift position switch
an d en g in e ECU
1KZ- -TE ENGINE SUP (RM790E)
DIAGNOSTICS
PREPARATION:
(a)
(b)
CHE CK:
Measure the voltage between terminal FSW of the engine ECU
connector and the body ground after the shift lever is moved
(--)
into the following positions.
OK:
A15066
( See p ag e IN - - 20).
- - ENGINE
Remove the glove compartment door.
Turn the ignition switch ON.
Shift Lever Position
Voltage
OK Check and replace engine ECU
IN - - 20).
1KZ-TE PAGES FROM SUPPLEMENT
BACK TO MODEL INDEX
1st Gear Except 1st Gear
9 - - 14 V 0 - - 3 V
(See page