Installation; General Operating Instructions; Preparing The Remote Control - Telestar DIRA M 1 A Operating Instructions Manual

6. INSTALLATION

6.1 General operating instructions

> Switch the device on or off using the standby button on the device
or the remote control.
> You can use the VOL+ button on the remote control or turn the
E
knob on the device to increase the volume.
> You can use the VOL- button on the remote control or turn the knob
on the device to decrease the volume.
> You can use the ▼▲ buttons or the control knob to select menu
items.
> Use the OK button on the remote control or press the knob on
the device to confirm your selection.

6.2. Preparing the remote control

Remove the battery transport lock on the remote control. To do so,pull
out the plastic tab on the battery housing in the remote control. This esta-
blishes battery contact.
To replace the remote control battery, open the battery compartment on
the back of the remote control.
Pull the battery compartment out of the remote control.
Remove the battery and insert a new battery of the same type.
Operating Instructions
1
104
2