Lens Position Setup And Focus Adjustment; Lens Position Setup - Panasonic ET-DLE035C Operating Instructions Manual

Lens position setup and focus adjustment

Lens position setup

z When using PT-FRZ120C
When moving the lens position to the home position, perform the operation with the
following procedure.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
执行
PROJECTOR SETUP
PROJECTOR ID
PROJECTION METHOD
LENS
OPERATION SETTING
LIGHT OUTPUT
BRIGHTNESS CONTROL
STANDBY MODE
QUICK STARTUP
NO SIGNAL SHUT-OFF
NO SIGNAL LIGHTS-OUT
MENU SELECT
SUB MENU
执行
LENS
LENS TYPE
LENS HOME POSITION
LENS CALIBRATION
MENU SELECT
CHANGE
Note
z If [LENS TYPE] is mistakenly set to [NORMAL], the projection lens will not move to the
correct home position.
1/2
1/2
ALL
NORMAL
100.0%
AUTO
NORMAL
OFF
DISABLE
DISABLE
NORMAL
1) Turn on the projector to start the
projection.
2) Press the < 菜单 >button to display
the [MAIN MENU] screen.
3) Select [PROJECTOR SETUP] in
the main menu and then press the
< 执行 > button.
4) Select [LENS] in the [PROJECTOR
SETUP] menu and then press the
< 执行 > button.
z The [LENS] screen appears.
5) Select [LENS TYPE] on the [LENS]
screen and then use the ◄►
buttons to select [ET-DLE035].
z Each press of the ◄► buttons
switches the item to [NORMAL] or
[ET-DLE035].
6) Select [LENS HOME POSITION] on
the [LENS] screen and then press
the < 执行 >button.
z A confirmation screen appears.
7) Use the ◄► buttons to select [OK]
and then press the < 执行 > button.
z [PROGRESS] is displayed on the
[HOME POSITION] screen and the
projection lens moves to the home
position.
ENGLISH-9