Lens Position Setup And Focus Adjustment; Lens Position Setup - Panasonic ET-D75LE95C Operating Instructions Manual

Lens position setup and focus adjustment

Lens position setup

Automatically return the lens to standard position using the projector.
The menu screens shown in these operating instructions are only provided as examples.
Actual menu screens may vary with the specific model.
z When using PT-SRZ31KC / PT-SRS30KC / PT-SRQ13KC / PT-SRZ12KC / PT-SRS11KC /
PT-SDZ21K2C / PT-SDS20K2C / PT-SDW17K2C / PT-SDZ18K2C
LENS
HOME POSITION
CHANGE
CANCEL
EXECUTE
执行 菜单
Note
z Complete the operation within approximately 5 seconds after the [HOME POSITION]
screen is displayed. The [HOME POSITION] screen will disappear after time limit.
z The home position of the lens is used when the lens is being replaced or when the
projector is being stored, and it is not the optical center of the screen.
z You can also display the [HOME POSITION] screen by pressing the < 镜头 > button on the
control panel or the < 移位 > button on the remote control for at least three seconds.
1) Turn on the projector, and start
2) Press the < 默认 > button on the remote
NORMAL
3) Press ◀ ▶ to switch the item.
[NORMAL]
[D75LE95]
[D75LE90]
*1: The items displayed will differ depending on the projector
4) Press the < 执行 > button.
projection.
control while the shift adjustment
screen is displayed.
z The [HOME POSITION] screen is
displayed.
z The items will switch each time you press
the button.
Moves the lens to the home position.
Select this item when replacing or
removing the projection lens. Select
this item when the Fixed-focus Lens
(Model No.: ET-D75LE50C) is used for
projection.
Moves the lens to the ET-D75LE95C
lens standard position.
Select this item when the Fixed-focus
or
Lens (Model No.: ET-D75LE95C) is
*1
used for projection.
model.
z [PROGRESS] is displayed in the [HOME
POSITION] screen, and the lens position
returns to the home position or the lens
standard position.
ENGLISH-9