Panasonic ET-DLE035C Operating Instructions Manual page 8

Projection relationships (continued)
 Dimensional relationship
z When using one of PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C /
PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C / PT-FDW93C /
PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB / PT-FD601C
For details on projection distance (L1), and A1, A2, L2, L3 and L4 values, refer to "Projected
image size and Projection distance" or "Projection distance formulas" in the Appendix.
z When using a projector other than one listed above
Please see "Setting up" in the operating instructions for the projector you are using.
 Keystone distortion correction
When attaching this lens for use, regardless of the projector model, set up the projector
so that the projected image is rectangular and the back of the projector and the screen
are parallel. In addition, depending on the projector used, keystone distortion correction
may be feasible after setup.
z When using one of PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C /
PT-FRZ88C / PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C /PT-FDZ97C
For keystone distortion in the vertical direction generated within the angle range
below, select [MAIN MENU] → [POSITION] → [GEOMETRY] / [GEOMETRY(2D)] →
[KEYSTONE] → [VERTICAL KEYSTONE] to perform correction.
Keystone distortion in the vertical direction greater than this angle and keystone
distortion in the horizontal direction can be corrected but the projected image overall
will no longer be in focus.
Correction feasible angle (α): 0 - 5°
z When using one of PT-FDW93C / PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C /
PT-FD605CB / PT-FD601C
If keystone distortion in vertical direction or horizontal direction is corrected, the projected
image overall will no longer be in focus. Set up the projector so that the projected image is
rectangular and the back of the projector and the screen are parallel.
z When using a projector other than one listed above
Please see "Setting up" in the operating instructions for the projector you are using.
8-ENGLISH
α
Screen
(Side view)