Table of Contents
Advertisement
4.
PREPARATION
4.1
4.1
Battery connector ring installation
Battery connector ring installation
Make sure the connector ring is screwed on securely
4.2 Battery charging
4.2
Battery charging
Before using for the first time, charge the battery 100%.
Charge the battery at least once within 3 months after delivery.
The battery will reach its full capacity after 3 or 4 charging/
discharging cycles.
Check that the device and the battery connector are completely dry.
Ensure that you are in a dry place away from splashes of water.
Never operate in the water or in the presence of humidity.
Do not charge immediately after use. Charging a hot or cold battery
can damage cells. Wait 30mins to 1hr to let the battery cool down or
warm up to room temperature.
Best temperature for charging is between 15-25ºC.
Do not drop battery.
Charging a damaged battery can cause the battery to catch fire.
14
46
/
The pins will only connect if the notches are properly aligned. No
great force is needed.
Once the battery is connected to the charger, the light on the charger should
turn red.
15
46
/
EN
Advertisement
Table of Contents
