Driving Power System Instructions - RACCEWAY KOBRA User Manual

DRIVING POWER SYSTEM INSTRUCTIONS

DESCRIPTlON OF REMOTECONTROL WITH ALARM
Unlock button
Alarm activation
DRIVING
First turn the ignition key to the "ON" position.
You will see the battery charge level on the batterystatus indicator.
Pointer location:
[H]:The battery is sufficiently charged
[L]:The battery is not charged enough
The position of the pointer in the red box
indicates that the battery is low and needs
To be recharged.
You can then easily start the electric scooter by turning the throttle handle (anti-clockwise).
Accelerate gradually, do not attempt to reach maximum speed immediately, which would
overload electrical components and battery.
Gradual acceleration saves both battery and engine.
The brake has the function of cutting off the power supply. If one of the brakes is pressed, the
power supply is automatically cut off and the motor is switched off.
Using the parking brake or releasing the throttle automatically cuts off the power to the
engine. However, you should avoid attempting to use the throttle at the same time as braking
to avoid overloading the engine.
The electric scooter control unit is equipped with an overvoltage protection. If the battery is
running low and you are going uphill or against a strong wind, the surge protector will limit the
speed. If you can use the pedals in such a situation, this will help the electrical system
function properly.
This electric scooter is also equipped with low voltage protection. If the battery is running low
and the accelerator pedal is still used, the battery may be seriously damaged. Therefore, in
this case, the power supply is automatically cut off.
After pressing the stop button, if the rear wheel is
completely locked and cannot be pushed when the
vehicle is pushed, even if the throttle is turned in
Key On state, the motor will not rotate and the
alarm will not sound;
Press the lock button of the remote control car to
release parking;
- 20 -