RACCEWAY KOBRA User Manual page 13

INSTALLING THE WHEEL AND FRONT BRAKE
Installation tools: Wrench No. 14*2
1. Install the drum brake in the hub → install the bushing on the other end of the hub
→ install the front wheel into the front fork, pay attention to the drum brake to be clamped
to the positioning post of the front fork → install the axle and lock it with two No. 14 wrenches.
2. Pass the brake cable tube into the fork shoulder cable hole → put the brake cable end into
the drum brake hole → put on the long spring and install the hollow column
→ put the brake cable end through the hollow column and twist the brake nut (if the wire core
Not long enough, please check if the brake cable is not stuck in the brake lever).
1 2
3
4 6
5
8 9
7
- 12 -