Optional Accessories - Makita VC007GL Instruction Manual

Storage of accessories
Accessories and attachments not in use, such as noz-
zles and pipes can be stored hanging on the hook at the
rear of the cleaner.
► Fig.45: 1. Accessory and attachment not in use
Pipes (with an optional stopper installed) can be placed
into the pipe holder when not using the cleaner for a
short time.
► Fig.46: 1. Stopper (optional accessory) 2. Pipe
holder
A hose can be wrapped and stored around the housing
or handle of the cleaner in large loops. Connect its both
ends together to make loops and hook the loops onto
the handle raised up. Alternatively, keep its root end
installed in the hose inlet and hang the loops on the
multi hook with the loose end tied up.
► Fig.47
► Fig.48
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose
• Front cuffs (22, 24, 38)
• Straight pipe
• Corner nozzle
• Round brush
• Powder filter M, H (HEPA)
• Damper
• Prefilter
• Water filter
• Nozzle assembly
• Bent pipe
• Polyethylene bag
• Filter bag
• Makita genuine battery and charger
• Wireless unit
• MAKPAC
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
23 ENGLISH