Switching To Telephone Mode; Activating Bluetooth; Connecting A Mobile Telephone - Porsche CDR30 Driver Manual

Switching to telephone mode

f Press the
button.

Activating Bluetooth

f Press the Bluetooth SoftKey.
The following message will appear "Activating
Bluetooth. Please wait.. .".
Bluetooth is now activated. It is now possible
to connect a mobile telephone to the CDR30.
26
Telephone mode (optional)

Connecting a mobile telephone

In principle, it is possible to use more than one
mobile telephone with the CDR30, however only
one mobile telephone may be connected to the
CDR30 at one time.
The CDR30 will attempt to automatically establish
a connection with the last mobile telephone to be
connected. If a connection cannot be established
with this mobile telephone then an attempt will be
made to connect to the previously connected
mobile telephone.
Authorising a mobile telephone
Each mobile telephone must be authorised the
first time it is used together with the CDR30. This
involves entering a so-called Bluetooth Code in
order to prevent unauthorised access to either
device.
1. Switch on the mobile telephone and enter the
PIN if required.
2. Activate Bluetooth on the mobile telephone.
3. Press the button.
4. Press the button.
The "Telephone Settings" menu will appear.
Device list
5. Press the SoftKey.
6. Use the rotary/push knob to select
for telephones
and press to confirm.
The CDR30 will search for Bluetooth-enabled
devices and will display a maximum of five
found devices in the Device list.
7. Select the mobile telephone from the list and
press to confirm.
The Bluetooth authorisation screen will appear:
Searching