Extended Sound Settings - Porsche CDR30 Driver Manual

Setting the treble
Bass
1. Press the SoftKey.
2. Turn the rotary/push knob to select the desired
value and press to confirm.
Setting the balance
The balance setting is used to adjust the volume
distribution between the left and right speakers.
Balance
1. Press the SoftKey.
2. Turn the rotary/push knob to select the desired
balance and press to confirm.
Setting the fader
Depending on the equipment fitted in the vehicle,
the fader settings can be used to adjust the
volume distribution between the front and rear
speakers.
Fader
1. Press the SoftKey.
2. Turn the rotary/push knob to select the desired
distribution and press to confirm.
Setting the loudness
(not for "BOSE" sound package)
Loudness increases the sound capacity by
accentuating the low frequencies (bass). This is
most effective when the volume is set to a low
level and ensures full sound reproduction whilst
driving.
f Press the
Loudness
SoftKey.
Loudness is now switched ON

Extended sound settings

or OFF .
1. Press the
2. Press the
Sound setting
The
selected values for the extended sound
settings will be displayed.
Traffic announcement volume
TA Vol.
The setting can be used to adjust the
difference is volume between the sound source
(e.g. radio) and the traffic announcement.
f Press the
TA Vol.
Turn the rotary/push knob to select the desired
volume difference and press to confirm.
button.
button.
menu and the currently
SoftKey.
9
General operation