Maintenance; Reboot - Tenda i27 User Manual

8.2

Maintenance

The Maintenance page allows you to
settings, and control LED
8.2.1

Reboot

Rebooting the AP disconnects all connections. You are recommended to reboot the AP in spare time.
Manual reboot
If a parameter does not take effect or the AP does not work properly, you can try rebooting the AP
manually to resolve the problem.
Method: on the Tools > Maintenance > Maintenance page, click Reboot.
Reboot schedule
This function allows the AP to automatically reboot as scheduled. You can use this function to
prevent wireless performance degradation or network instability that occurs after a long AP uptime.
The AP supports the following two types of scheduled reboot:
Reboot
−
Reboot
−
Configuring the AP to reboot at an interval
Rebooting at intervals is based on the system time. To avoid reboot time error, ensure that the
time is correct.
Step 1 Click Tools > Maintenance > Reboot Schedule.
Step 2 Enable Reboot Schedule.
Step 3 Set Type to Reboot Interval.
reboot
indicator.
Interval: The AP reboots at the interval you set.
Schedule: The AP reboots regularly at the time you set.
and reset AP, upgrade
78
Document version: V1.0
firmware, back up or restore
system