Table of Contents
Advertisement
server.crt (SSL Certificates)
The TeraStation sends the file to a computer, and the computer uses it to perform encryption. The TeraStation
receives the encrypted data and uses server.key (the private key) to decrypt the data.
In SSL, this key contains the server certificate, and depending on your computer environment, a check may be
performed to determine the trustworthiness of the certificate. The server certificate included in the TeraStation's
default settings was created by Buffalo, and in some cases the security certificate warning message may appear in
your browser or another security software. Disregard this message and continue.
server.key (SSL Private Key)
This file is used as a pair with server.crt (server certificate). This is required for decrypting the data that was
encrypted by the server certificate, and this is normally not revealed.
Note: The passphrase for the private key must be removed before importing to the TeraStation.
Updating SSL Key Files
To update a server certificate and a private key for SSL, follow this procedure.
1
In Settings, click Management.
2
Click SSL.
3
Register "server.key" for "Secret Key" and "server.crt" for "Server Certificate (.crt)", then click Import.
Notes:
• Place the SSL key files (server.key, server.crt) directly below the C root drive. The SSL key files may not be able to
be updated if it is placed in folders or paths that contain multibyte characters.
• If Settings cannot be displayed after updating, initialize the TeraStation settings.
• Updating the firmware initializes an SSL key.
Web Server
The TeraStation can be used as a web server. In addition to HTML files, images, and JavaScript, the TeraStation also
allows installation of Perl script and PHP script files.
1
In Settings, click Services.
2
Move the web server switch to the
3
Click
to the right of "Web Server".
position to enable the web server.
195
Advertisement
Table of Contents
