Multi-Link Versa-Link ATX-300 Operating Instructions Manual page 8

E Q U I P M E N T
Some MODEM cannot dial the symbols
S
Therefore, if you plan to connect a computer
MODEM, it is best to change the device selection
code for your computer to an appropriate code that
does not use the symbols
2 . 3 T E L E P H O N E S
M U L T I - L I N E
Your ATX-300 may be used with single and multi-line
telephone equipment. Both tone-dialing and pulse-
dialing equipment may be used with your ATX-300
See section 4.2.2 for restrictions when using pulse-
dialing equipment.
2 . 4 O T H E R
Your ATX-300 is also compatible with Credit
Authorization Terminals, Electronic Mail Terminals,
and Loop-Start dial-up TELEX machines.
Your ATX-300 can also be used with answering
machines and cordless phones.
2.5 CALLER ID
DISPLAY DEVICE
Your Versa-Link ATX-300 is now programmable to work
with the "Caller ID" CLASS service offered by your local
telephone company. See
instructions. This feature allows the calling party's phone
number to appear on your "Caller ID" display unit when
the ATX-300 routes the call.
VERSA-LINK ATX-300
* #
or
* #
or .
A N D
S Y S T E M S
E Q U I P M E N T
section 7.3 for programming
.