Advertisement
Suggest repair to customer:
•
Deburr the area with a hand deburring tool to remove the sharp edges If sharp edges are found.
•
Recommend HV battery replacement if:
o
The HV battery enclosure fails the leak test due to impact.
o
The HV battery enclosure has low isolation due to impact.
Rear Ancillary
The rear ancillary area is identified with a red box in Figure 20. When the rear ancillary area is damaged, follow the steps
below:
Suggest repair to customer:
•
Deburr the area with a hand deburring tool to remove the sharp edges If sharp edges are found.
•
Recommend HV battery replacement if:
o
The HV battery enclosure fails the leak test due to impact.
o
The HV battery enclosure has low isolation due to impact.
For feedback on the accuracy of this document, email ServiceBulletinFeedback@tesla.com.
TN-21-16-001 R1
Figure 20 – Rear Ancillary
Page 12 of 12
Advertisement
