Description Of The Product; Overview Of The System; Standard Hvc-Pd 150 Kw E-Bus Charger System - ABB HVC-PD Installation Manual

2. Description of the product

2.1. Overview of the system

Example of a complete installation
A Low voltage power distribution cabinet of the owner
B Input power cables in cable conduit
Power Cabinet – 450 kW (HVC 150 + 2x HVC 150S)
C
D Cables between Power Cabinet and charge pole in cable conduits
E Charge Pole with ACM and ACS
F Bus stop space for Opportunity Charging (OPP Charge)
G Electric hybrid and/or full electric Bus
The HVC-PD E-Bus Charger consists out of multiple components and it may require additional
parts depending on the project and location of installation which dictates whether these parts
are needed.
ABB offers a standard delivery system configurations with a DC charge power of 150, 300 or
450 kW. Additional needed components can be ordered separately and are not part of the
standard delivery. See section Accessories on Page 20.

2.1.1. Standard HVC-PD 150 kW E-Bus Charger system

The following parts are provided for this system configuration:
•
1x HVC 150 Power Cabinet (ABB6AGC063474)
•
1x HVC-PD standard Charge Pole (ABB6AGC069038) including:
▪
1x Vertical frame, with mounted:
➢ 1x ACS Control Module (ACM)
➢ 1x Distance sensor
➢ 1x Charge state indicator light
➢ 1x Emergency unit
▪
1x Horizontal frame, with mounted:
➢ 1x Pantograph (ACS)
➢ 1x WiFi communication unit (for the bus)
➢ Premounted cable set for inside the pole
▪
Masks Plate work and door
▪
Pole mounting material
Document: v3.1 / Document No.: 6AGA000008-0600-EN | Date: 22-05-2019
HVC-PD E-Bus Charger Installation Guide
Page 15 of 139