KoamTac KDC280 Startup Manual

What's in the Box?
KDC280 KDC Lanyard
• •
®
Type-C USB Cable Quick Manual
• •
Protective Rubber Boot KOAMTACON Guide
• •
Quick Manual
Basic Operation
1. Aim the KDC directly at the barcode and press the
SCAN button, ensuring the beam covers the barcode
horizontally.
*KDC280L *KDC280D *KDC280C
2. A successful scan (A) will sound 1 beep, show a green
LED, and display the scanned info on the screen. An
unsuccessful scan (B) will sound 5 beeps, show a red
LED, and display "Read Failed" on the screen.
02:35:41
Read
123456
Failed
Powering On/Off
Power On Power Off
Press and hold the SCAN Press and hold the SCAN
and DOWN buttons for 3 and DOWN buttons for 3
seconds. seconds again.
3s
Bluetooth Pro les Explained
Allows one-way Bluetooth communication
with an Android or iOS host device. The
KDC only transmits data to the host
device.
Allows two-way Bluetooth communication.
The KDC transmits data to the host device
and the host can transmit data back to the
KDC.
Allows one-way Bluetooth communication
with a Windows PC. The KDC only
transmits data to the Windows PC.
HID inputs data directly into an application. SPP requires
the KOAMTAC KTSync ® app or integration of the
KOAMTAC SDK to input data into an application.
Additional Accessories
1-Slot and 4-Slot Type-C USB
• •
Charging Cradles KBLED41 BLE Dongle
•
650mAh Battery Protective Rubber Boot
• •
KDC280 Models
KDC280L 1D Laser Bluetooth Barcode Scanner
•
KDC280D 1D CCD Bluetooth Barcode Scanner
•
KDC280C 2D Imager Bluetooth Barcode Scanner
•
Visit our website for more information.
Pairing & Connecting
1. Navigate to the Bluetooth setting on the host PC,
Mac, Smartphone, or Tablet.
2. Ensure that Bluetooth is enabled on the host device
and searching for devices.
3. Using the KDC, scan the pairing barcode that
corresponds to your desired Bluetooth profile. If you
are unsure which Bluetooth profile is right for you,
please refer to previous panel.
4. Check the list of available Bluetooth devices on your
host device. In iOS, the application will need to
search devices.
5. From the list, select the KDC280 listed by serial
number in brackets that matches the serial number
found on the back side of the KDC280.
6. In HID Mode, KDC280 is ready to use.
7. To complete connection in SPP Mode, launch KTSync
or your application and select KDC280 to connect.
KDC280
Mini Guide
Pairing Barcodes
HID
HID Windows
SPP