Tripp Lite PDUMNH20HV Owner's Manual page 6

3. Installation
3.1-3 Wall Mounting: Use three screws
to attach each of the two shorter
mounting brackets to the PDU
as shown. Mount the PDU to
the wall by inserting two or more
user-supplied screws through the
mounting brackets and into secure
mounting points.
You may have to remove the
screws attaching the mounting
brackets to the PDU, change the
orientation of the brackets as
shown and reattach the brackets.
Use only the screws supplied by
the manufacturer or their exact
equivalent (#8-32, 3/16" flat
head). Attach the PDU to a stable
mounting surface by inserting
two or more user-supplied screws
through the PDU mounting
brackets and into secure points on
the mounting surface.
3.1-4
Under-Counter Mounting: Use
three screws to attach each of
the two shorter mounting brackets
to the PDU as shown. Mount the
PDU under the counter by inserting
two or more user-supplied screws
through the mounting brackets and
into secure mounting points.
You may have to remove the
screws attaching the mounting
brackets to the PDU, change the
orientation of the brackets as
shown and reattach the brackets.
Use only the screws supplied by
the manufacturer or their exact
equivalent (#8-32, 3/16" flat
head). Attach the PDU to a stable
mounting surface by inserting
two or more user-supplied screws
through the PDU mounting
brackets and into secure points on
the mounting surface.
15-04-184-93341C.indb 6
3.1-3
3.1-3
3.1-4
3.1-4
6
4/16/2015 8:49:10 AM