Tripp Lite PDUMH15AT Owner's Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. Power distribution unit
  5. PDUMH15AT
  6. Owner's manual

Tripp Lite PDUMH15AT Owner's Manual

Switched/metered rack pdu with automatic transfer switch
Hide thumbs Also See for PDUMH15AT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
PDUMH20HVAT, PDUMH20HVATNET
1. Important Safety Instructions
2. Installation
2.1 Mounting the PDU
2.2 Connecting the PDU
2.3 Networking the PDU
2.4 Test and Configure
3. Features
4. Configuration and Operation
4.1 Automatic Transfer Switch
4.2 Remote Monitoring and Control
5. Technical Support
6. Warranty and Warranty Registration
Copyright © 2010 Tripp Lite. All rights reserved. SmartOnline
201003110 93-2945_EN.indd 1
Owner's Manual
PDUMH15AT, PDUMH15ATNET,
PDUMH20AT, PDUMH20ATNET,
Switched/Metered Rack PDU with
Automatic Transfer Switch
1111 W. 35th Street • Chicago, IL 60609 USA
www.tripplite.com/support
*
is a trademark of Tripp Lite.
™
2
2
2
3
5
7
8
10
10
11
12
12
3/26/2010 1:24:05 PM

Advertisement

Table of Contents
loading

Related Manuals for Tripp Lite PDUMH15AT

Summary of Contents for Tripp Lite PDUMH15AT

  • Page 1 5. Technical Support 6. Warranty and Warranty Registration 1111 W. 35th Street • Chicago, IL 60609 USA www.tripplite.com/support Copyright © 2010 Tripp Lite. All rights reserved. SmartOnline is a trademark of Tripp Lite. ™ 201003110 93-2945_EN.indd 1 3/26/2010 1:24:05 PM...

  • Page 2: Important Safety Instructions

    Exact mounting configurations may vary. 2.1.1 1U Rack Mounting: Attach the PDU to PDUMH15AT, PDUMH15ATNET, the rack by inserting four user-supplied screws PDUMH20AT, PDUMH20ATNET through the PDU mounting brackets and into the mounting holes of the rack rail as shown.

  • Page 3: Connecting The Pdu

    PDUMH15AT connects to the IEC power inlet 2.2.1 at the rear 2.2.1 PDUMH15ATNET PDUMH20ATNET of the PDU (PDUMH15AT, PDUMH15ATNET - Primary Input (230V Model) IEC-320-C14 inlet; PDUMH20AT, PDUMH20ATNET, PDUMH20HVAT, PDUMH20HVATNET - IEC-320-C20 inlet). 2.2.2 To connect the Secondary input cord:...
  • Page 4 ™ UPS System. The UPS system must not share a circuit with a heavy electrical load (such as an air conditioner or PDUMH15AT, refrigerator). Under normal operating conditions, PDUMH15ATNET the PDU will distribute AC power from the Primary input source. Connect the Secondary input plug...

  • Page 5: Networking The Pdu

    VT100 emulation Note: The following message will appear in the terminal startup menu: IAM:Got AUTO-CONFIGURED IPv6 address E80::4200:FF:FE01:8 on interface eth0:3 IPv6 is not currently supported. Tripp Lite is working on IPv6 for a future release. 201003110 93-2945_EN.indd 5 3/26/2010 1:24:12 PM...
  • Page 6 2. Installation ( continued ) 2.3.3 Static IP Address Assignment/Terminal Menu Configuration Settings (continued) Connect SNMPWEBCARD to Computer: Use the mini-DIN to DB9 serial cable (part number 73-1025) included with the card to connect the card to the computer. The circular connector one end of the cable attaches to the 8-pin mini-DIN serial port on the card.
  • Page 7 DO NOT MODIFY UNLESS DIRECTED BY YOUR ADMINISTRATOR You can also change the root password, real-time clock and other settings. (Tripp Lite recommends against changing the default settings unless you are an advanced user with a specific purpose.) After you have finished entering settings, the card will save changes to memory and reboot (this may take several minutes).
  • Page 8 Management Station that will monitor the UPS system via SNMP. The files are provided on the CD-ROM included in the product package. The following message will appear in the terminal startup menu: IAM:Got AUTO-CONFIGURED IPv6 address FE80::4200:FF:FE01:8 on interface eth0:3 IPv6 is not currently supported. Tripp Lite is working on IPv6 for a future release. 3. Features...
  • Page 9 3. Features ( continued ) Primary Input Model PDUMH15AT/15ATNET: The cord is permanently attached to the PDU and has a NEMA 5-15P plug. Model PDUMH20AT/20ATNET: The cord is permanently attached to the PDU and has a NEMA L5-20P plug. Model PDUMH20HVATNET: The C19-C20 cord is detachable.

  • Page 10: Configuration And Operation

    4. Configuration and Operation 4.1 Automatic Transfer Switch When the Primary and Secondary inputs are both connected to Tripp Lite UPS Systems, the PDU operates as an Automatic Transfer Switch, providing redundant input power for high availability applications. Under normal operating conditions, the PDU will distribute power from the Primary input source, switching to the Secondary input source under certain conditions.

  • Page 11: Remote Monitoring And Control

    4. Configuration and Operation ( continued ) 4.1.2 Automatic Transfer Switch Source Selection The PDU will power up if one of the input sources is greater than the minimum startup voltage. In normal operation (after power-up), if the presently selected source (primary or secondary) degrades to a lesser condition, the unit should switch to the alternate source, if that source is of better quality.

  • Page 12: Technical Support

    Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609 USA. Seller will pay return shipping charges.

This manual is also suitable for:

Pdumh15atnetPdumh20atnetPdumh20hvatPdumh20hvatnetPdumh20at

Table of Contents