Olympus OM-D E-M1 II Manual

MODE

P, S, A, and M Modes

• P - Programmed auto
• S - Shutter-priority auto
• A - Aperture-priority auto
• M - Manual

APERTURE SETTING/F-STOP

Rotate the mode dial to A.

Select the aperture value (F-number) using the Rear Dial () with the Fn lever in position 1.
Adjust the focus and shoot the subject.

ISO

With the Fn Lever in position 2, use the Front Dial () to select your desired ISO setting.

FOCUS MODE

Press the button on the top of the camera.
Rotate the rear wheel to select your desired Focus mode.
Press the shutter button halfway to check the focus.

FOCUS POINT

Press the Fn1 button, then using the front dial () to select your focus point or "target" selection.

SELECTION

Press the Fn1 button to display the target areas, then using the arrow pad to position your target position.

CONTINUOUS SHOOTING MODE

Press the button.

Rotate the rear wheel to select your desired continuous shooting mode.
The camera records images continuously.

SELF-TIMER MODE

Press the button.
Rotate the rear wheel to select your desired self-timer shooting mode.

The 12-second self-timer is convenient if the photographer would like to appear in the photo. The 2-second self-timer is convenient for reducing camera shake.

METERING MODE

Press the button on the top of the camera.

Rotate the front wheel to select your desired Metering mode.

EXPOSURE COMPENSATION

With the Fn Lever in position 1, use the Front Dial () to select your desired compensation from ±5.0EV.

WHITE BALANCING

With the Fn Lever in position 2, use the Rear Dial () to select your desired White Balance.

	Auto white balance
	Shooting clear days
	Shooting in the shade
	Cloudy days
	Tungsten light
	Fluorescent light
	Underwater
	Using a flash